• HomeIES Electrical Engineering Syllabus

  • (3 out of 5 based on 90 Ratings)

Here you will find IES Electrical Engineering Syllabus 2023.

Section I-

Subject:-

Objective Papers General Ability Test

(Part A: General English)
(Part B: General Studies)

Duration:- 2 hrs.

Maximum Marks:- 200


Subject:- Electrical Engineering Paper I

Duration:- 2 hrs.

Maximum Marks:-  200


Subject:- Electrical Engineering Paper II

Duration:- 2 hrs.

Maximum Marks:-  200


Section II-

Conventional Papers

Subject:- Electrical Engineering- Paper I

Duration:- 3 hrs

Maximum Marks:-  200


Subject:- Electrical Engineering Paper II

Duration:- 3 hrs

Maximum Marks:-  200

TOTAL 1000 Marks


For both objective and conventional type papers

Paper-1

1. EM Theory

Electric and magnetic fields. Gauss’s Law and Amperes Law. Fields in dielectrics, conductors and magnetic materials. Maxwell’s equations. Time varying fields. Plane-Wave propagating in dielectric and conducting media. Transmission lines.

2. Electrical Materials

Band Theory, Conductors, Semi-conductors and Insulators. Super-conductivity. Insulators for electrical and electronic applications. Magnetic materials. Ferro and ferri magnetism. Ceramics, Properties and applications. Hall effect and its applications. Special semi conductors.

3. Electrical Circuits

Circuits elements. Kirchoff’s Laws. Mesh and nodal analysis. Network Theorems and applications. Natural response and forced response. Transient response and steady state response for arbitrary inputs. Properties of networks in terms of poles and zeros. Transfer function. Resonant circuits. Threephase circuits. Two-port networks. Elements of two-element network synthesis.

4. Measurements and Instrumentation

Units and Standards. Error analysis, measurement of current, Voltage, power, Power-factor and energy. Indicating instruments. Measurement of resistance, inductance, Capacitance and frequency. Bridge measurements. Electronic measuring instruments. Digital Voltmeter and frequency counter. Transducers and their applications to the measurement of non-electrical quantities like temperature, pressure, flow-rate displacement, acceleration, noise level etc. Data acquisition systems. A/D and D/A converters.

5. CONTROL SYSTEMS

Mathematical modelling of physical systems. Block diagrams and signal flow graphs and their reduction. Time domain and frequency domain analysis of linear dynamical system. Errors for different type of inputs and stability criteria for feedback systems. Stability analysis using Routh-Hurwitz array, Nyquist plot and Bode plot. Root locus and Nicols chart and the estimation of gain and phase margin. Basic concepts of compensator design. State variable matrix and its use in system modelling and design. Sampled data system and performance of such a system with the samples in the error channel. Stability of sampled data system. Elements of non-linear control analysis. Control system components, electromechanical, hydraulic, pneumatic components.
Electrical Engineering Syllabus: Paper-2

1. Electrical Machines and Power Transformers

Magnetic Circuits – Analysis and Design of Power transformers. Construction and testing. Equivalent circuits. Losses and efficiency. Regulation. Auto-transformer, 3-phase transformer. Parallel operation.

Basic concepts in rotating machines. EMF, torque, basic machine types. Construction and operation, leakage losses and efficiency.

B.C. Machines. Construction, Excitation methods. Circuit models. Armature reaction and commutation. Characteristics and performance analysis. Generators and motors. Starting and speed control. Testing, Losses and efficiency.

Synchronous Machines. Construction. Circuit model. Operating characteristics and performance analysis. Synchronous reactance. Efficiency. Voltage regulation. Salient-pole machine, Parallel operation. Hunting. Short circuit transients.

Induction Machines. Construction. Principle of operation. Rotating fields. Characteristics and performance analysis. Determination of circuit model. Circle diagram. Starting and speed control.

Fractional KW motors. Single-phase synchronous and induction motors.

2. Power systems

Types of Power Stations, Hydro, Thermal and Nuclear Stations. Pumped storage plants. Economics and operating factors.

Power transmission lines. Modeling and performance characteristics. Voltage control. Load flow studies. Optimal power system operation. Load frequency control. Symmetrical short circuit analysis. ZBus formulation. Symmetrical Components. Per Unit representation. Fault analysis. Transient and steady-state stability of power systems. Equal area criterion.

Power system Transients. Power system Protection Circuit breakers. Relays. HVDC transmission.

3. ANALOG AND DIGITAL ELECTRONICS AND CIRCUITS

Semiconductor device physics, PN junctions and transistors, circuit models and parameters, FET, Zener, tunnel, Schottky, photo diodes and their applications, rectifier circuits, voltage regulators and multipliers, switching behavior of diodes and transistors.

Small signal amplifiers, biasing circuits, frequency response and improvement, multistage amplifiers and feed-back amplifiers, D.C. amplifiers, Oscillators. Large signal amplifiers, coupling methods, push pull amplifiers, operational amplifiers, wave shaping circuits. Multivibrators and flip-flops and their applications. Digital logic gate families, universal gates-combination circuits for arithmetic and logic operational, sequential logic circuits. Counters, registers, RAM and ROMs.

4. MICROPROCESSORS

Microprocessor architecture-Instruction set and simple assembly language programming. Interfacing for memory and I/O. Applications of Micro-processors in power system.

5. COMMUNICATION SYSTEMS

Types of modulation; AM, FM and PM. Noise and bandwidth considerations. Digital communication systems. Pulse code modulation and demodulation. Elements of sound and vision broadcasting. Carrier communication. Frequency division and time division multiplexing, Telemetry system in power engineering.

6. POWER ELECTRONICS

Power Semiconductor devices. Thyristor. Power transistor, GTOs and MOSFETS. Characteristics and operation. AC to DC Converters; 1-phase and 3-phase DC to DC Converters; AC regulators. Thyristor controlled reactors; switched capacitor networks.

Inverters; single-phase and 3-phase. Pulse width modulation. Sinusoidal modulation with uniform sampling. Switched mode power supplies.

 

IES Civil Engineering Syllabus

IES Mechanical Engineering Syllabus

IES Electronics and Telecommunication Engineering Syllabus

 



MS Ramaiah Institute of Technology is located in Bangalore in Karnataka.


M S Ramaiah Institute of Technology Bangalore Courses Offered

Address : Jnanasangama Machhe, Khanapur Road, Khanapur Road, Belgaum, Karnataka 590014, India Ph : 0831 2405458

Mepco Schlenk Engineering College in Sivakasi, Tamil Nadu is a self financed technical institute, established in the year 1984 under the guidance of Mepco Schlenk Charities.


Mepco Schlenk Engineering College Sivakasi Courses Offered

Address : Sivakasi Mepco Engineering College (PO) - 626 005 Ph : 04562 - 235000(30 Lines) Fax : 04562 - 235111 E-Mail : principal@mepcoeng.ac.in

Maharashtra Institute of Technology (MIT) is one of the leading self financed engineering colleges in Pune that was founded in the year 1983 by Dr.


Maharashtra Institute of Technology (MIT) Courses Offered

Address : S.No.124, Paud Road, Kothrud, Pune, Maharashtra, India Contact No: 020-3027 3400, 3027 3459 Email: info@mitpune.com.

Motilal Nehru National Institute of Technology (MNIT) formerly known as Motilal Nehru Engineering College was founded in the year 1961 as a joint venture of the central government and the government of Uttar Pradesh.


Motilal Nehru National Institute of Technology (MNIT) Courses Offered

Address : Teliarganj, Allahabad, Uttar Pradesh, India

Mukesh Patel School of Technology Management and Engineering is an important part of Narsee Monjee Institute of Management Studies University, which is a deemed university.


Mukesh Patel School of Technology Management and Engineering Mumbai Courses Offered

Address : Behind Homeopathy College, Bhakti VedantaSwami Marg, JVPD Scheme, Vile-Parle(west), Pin-400056. Ph : 22 - 26717970,26717971 Email : mumbai@mpstme-nmims.org

NIT (National Institute of Technology) in Calicut is a public engineering institute that was set up in the year 1961.


NIT (National Institute of Technology) Calicut Courses Offered

Address : Kettangal Koduvally Road, Kozhikode, Kerala, India Ph : 0495 228 6118

National Institute of Technology is a public engineering college in West Bengal that was established in year 1960.


National Institute of Technology (NIT) Durgapur Courses Offered

Address : Durgapur, West Bengal India    PIN - 713209

National Institute of Technology Jamshedpur formerly known as Regional Engineering College is a public technical university located in Jamshedpur, Jharkhand.


National Institute of Technology Jamshedpur Courses Offered

Address : NIT Campus, P.O .RIT, Jamshedpur, Jharkhand, India Contact No : 0657-2407614, 2407642 Email: dir.nitjsr@gmail.com

NIT (National Institute of Technology) in Rourkela is a public engineering institute that was set up in the year 1964.


NIT (National Institute of Technology) Rourkela Courses Offered

Address : Orissa, Rourkela Pin - 769008.

National Institute of Technology Suratkal is a public engineering institute that was set up in the year 1960.


NIT (National Institute of Technology) Surathkal Courses Offered

Address : Surathkal, Srinivasnagar, Mangalore - 575025, India. Ph : +91-824-2474000 Fax :+91-824-2474033

National Institute of Technology in Tiruchirappalli is a public engineering institute that was set up in the year 1964.


NIT (National Institute of Technology) Trichy Courses Offered

Address : Tanjore Main Road, National Highway 67, Tiruchirappalli - 620015, Tamil Nadu, India.

PSG College of Technology is located in Coimbatore in Tamil Nadu.


PSG College of Technology Courses Offered

Address : Post Box No. 1611 Peelamedu Coimbatore - 641 004 Tamil Nadu INDIA Ph : 422-2572177, 2572477, 2580455, 2578455, 4344777 Email: principal@psgtech.edu

Punjab Technical University (PTU), Jalandhar was established in the year 1997 by the State Government of Punjab.


Punjab Technical University (PTU) Jalandhar Courses Offered

Address : Near Pushpa Gujral Science City Jalandhar - 144 601 Punjab Phone: +91-181-662521,662526 Fax : +91-181-662525

Rashtreeya Vidyalaya College of Engineering is a self financed technical institute, which was established by the Rashtriya Shikshana Sanstha Trust (RSST) in Bangalore.


Rashtreeya Vidyalaya College of Engineering Courses Offered

Address : R.V. Vidyanikethan Post, Mysore Road, Bangalore, Karnataka, India. Ph : 91 - 080-6717 8021 Email: principal@rvce.edu.in

Satyabhama University, previously Satyabhama College of Engineering was founded in 1988 by Jeppiar Educational Trust.


Sathyabama University Chennai Courses Offered

Address : Jeppiaar Nagar, Rajiv Gandhi Road, Chennai - 600 119. Tamilnadu, INDIA.

can ies crack through self study?
Posted By : " + vikas
Posted On : 17-07-2013 16:12:01

Reply to this Comment
Name :
Email :
Mobile :
Comments :
i need all subjects book from which i can crack ies in electrical
Posted By : " + sangameshwar padadalli
Posted On : 05-07-2013 23:31:19

Reply to this Comment
Name :
Email :
Mobile :
Comments :