- HomeIES Civil Engineering Syllabus
Here you will find IES Civil Engineering Syllabus 2023.
Subject:-
Section I- Objective Papers General Ability Test
(Part A: General English)
(Part B: General Studies)
Duration:- 2 hrs.
Maximumtion Marks:- 200
Subject:- Civil Engineering Paper I
Duration:- 2 hrs.
Maximumtion Marks:- 200
Subject:- Civil Engineering Paper II
Duration:- 2 hrs.
Maximumtion Marks:- 200
Section II-
Conventional Papers
Subject:- Civil Engineering Paper I
Duration:- 3 hrs.
Maximumtion Marks:- 200
Subject:- Civil Engineering Paper II
Duration:- 3 hrs.
Maximumtion Marks:- 200
TOTAL - 1000 Marks
For both objective and conventional type papers
PAPER-I
1. BUILDING MATERIALS
Timber : Different types and species of structural timber, density-moisture relationship, strength in different directions, defects, influence of defects on permissible stress, preservation, dry and wet rots, codal provisions for design, plywood.
Bricks :- Types, Indian Standard classification, absorption, saturation factor, strength in masonry, influence of morter strength on masonry strength.
Cement:- Compounds of, different types, setting times, strength.
Cement Mortar : Ingredients, proportions, water demand, mortars for plastering and masonry.
Concrete :- Importance of W/C Ratio, Strength, ingredients including admixtures, worksability, testing for strength, elasticity, non-destructive testing, mix design methods.
2. SOLID MECHANICS
Elastic constants, stress, plane stress, Mohr’s circle of stress, strains, plane strain, Mohr’s circle of strain, combined stress; Elastic theories of failure; Simple bending, shear; Torsion of circular and rectangular sections and simple members.
3. STRUCTURAL ANALYSIS
Analysis of determinate structures - different methods including graphical methods. Analysis of indeterminate skeletal frames moment distribution, slopedeflection, stiffness and force methods, energy methods, Muller-Breslau principle and application. Plastic analysis of indeterminate beams and simple frames - shape factors.
DESIGN OF STEEL STRUCTURES
Principles of working stress method. Design of connections, simple members, Built-up sections and frames, Design of Industrial roofs. Principles of ultimate load design. Design of simple members and frames.
5. DESIGN OF CONCRETE AND MASONRY STRUCTURES
Limit state design for bending, shear, axial compression and combined forces. Codal provisions for slabs, beams, walls and footings. Working stress method of design of R.C. members. Principles of prestressed concrete design, materials, methods of prestressing, losses. Design of simple members and determinate structures. Introductions to prestressing of indeterminate structures. Design of brick masonry as per I.S. Codes.
6. CONSTRUCTION PRACTICE, PLANNING AND MANAGEMENT
Concreting Equipment:- Weight Batcher, Mixer, vibrator, batching plant, concrete pump. Cranes, hoists, lifting equipment.
Earthwork Equipment :- Power shovel, hoe, dozer, dumper, trailers and tractor, rollers, sheep foot rollers, pumps.
Construction, Planning and Management :- Bar chart, linked bar chart, work-break down structures, Activity - on - arrow diagrams. Critical path, probabilistic activity durations; Event-based networks.
PERT network: Time-cost study, crashing; Resource allocation.
CIVIL ENGINEERING PAPER-II (For both objective and conventional type papers)
1. (a) FLUID MECHANICS, OPEN CHANNEL FLOW, PIPE FLOW:- Fluid Properties, Pressure, Thrust, Buoyancy; Flow Kinematics; Integration of flow equations; Flow measurement; Relative motion; Moment of momentum; Viscosity, Boundary layer and Control, Drag, Lift; dimensional Analysis, Modelling; Cavitation; Flow oscillations; Momentum and Energy principles in Open channel flow, Flow controls, Hydraulic jump, Flow sections and properties; Normal flow, Gradually varied flow; Surges; Flow development and losses in pipe flows, Measurements; Siphons; Surges and Water hammer; Delivery of Power Pipe networks.
(b) HYDRAULIC MACHINES AND HYDROPOWER:- Centrifugal pumps, types, performance parameters, scaling, pumps in parallel; Reciprocating pumps, air vessels, performance parameters; Hydraulic ram; Hydraulic turbines, types, performance parameters, controls, choice; Power house, classification and layout, storage, pondage, control of supply.
2. (a) HYDROLOGY :- Hydrological cycle, precipitation and related data analyses, PMP, unit and synthetic hydrographs; Evaporation and transpiration; Floods and their management, PMF; Streams and their gauging; River morphology; Routing of floods; Capacity of Reservoirs.
(b) WATER RESOURCES ENGINEERING :- Water resources of the globe: Multipurpose uses of Water: Soil-Plant-Water relationships, irrigation systems, water demand assessment; Storages and their yields, ground water yield and well hydraulics; Waterlogging, drainage design; Irrigation revenue; Design of rigid boundary canals, Lacey's and Tractive force concepts in canal design, lining of canals; Sediment transport in canals; Non-Overflow and overflow sections of gravity dams and their design, Energy dissipators and tailwater rating; Design of headworks, distribution works, falls, cross-drainage works, outlets; River training.
ENVIRONMENTAL ENGINEERING
3. (a) WATER SUPPLY ENGINEERING :- Sources of supply, yields, design of intakes and conductors; Estimation of demand; Water quality standards; Control of Water-borne diseases; Primary and secondary treatment, detailing and maintenance of treatment units; Conveyance and distribution systems of treated water, leakages and control; Rural water supply; Institutional and industrial water supply.
(b) WASTE WATER ENGINEERING:- Urban rain water disposal; Systems of sewage collection and disposal; Design of sewers and sewerage systems; pumping; Characteristics of sewage and its treatment, Disposal of products of sewage treatment, streamflow rejuvenation Institutional and industrial sewage management; Plumbing Systems; Rural and semi-urban sanitation.
(c) SOLID WASTE MANAGEMENT:- Sources, classification, collection and disposal; Design and Management of landfills.
(d) AIR AND NOISE POLLUTION AND ECOLOGY:- Sources and effects of air pollution, monitoring of air pollution; Noise pollution and standards; Ecological chain and balance, Environmental assessment.
4 (a) SOIL MECHANICS:- Properties of soils, classification and interrelationship; Compaction behaviour, methods of compaction and their choice; Permeability and seepage, flow nets, Inverted filters; Compressibility and consolidation; Shearing resistance, stresses and failure; soil testing in laboratory and in-situ; Stress path and applications; Earth pressure theories, stress distribution in soil; soil exploration, samplers, load tests, penetration tests.
(b) FOUNDATION ENGINEERING :- Types of foundations, Selection criteria, bearing capacity, settlement, laboratory and field tests; Types of piles and their design and layout, Foundations on expansive soils, swelling and its prevention, foundation on swelling soils.
5. (a) SURVEYING :- Classification of surveys, scales, accuracy; Measurement of distances - direct and indirect methods; optical and electronic devices; Measurement of directions, prismatic compass, local attraction; Theodolites - types; Measurement of elevations - Spirit and trigonometric levelling; Relief representation; Contours; Digital elevation modelling concept; Establishment of control by triangulations and traversing - measurements and adjustment of observations, computation of coordinates; Field astronomy, Concept of global positioning system; Map preparation by plane tabling and by photogrammetry; Remote sensing concepts, map substitutes.
b) TRANSPORTATION ENGINEERING :-
Transportation engineering is the relevance of technology and scientific ethics to the planning, operation , functional design and management of facilities for any sort of transportation in order to access fast, protected, well-organized, suitable, inexpensive movement of people and goods to different places . This includes
Planning of highway systems, horizontal and vertical curves, alignment and geometric design, grade separation; Drainage ; Materials and construction methods for different surfaces and maintenance; Principles of pavement design.
Intersections, Traffic surveys, signaling; Mass transit systems, networking , accessibility. Tunnelling, methods of construction, alignment, disposal of muck, lighting and ventilation, traffic control, drainage, emergency management.
Airports – orientation and layout ; Zoning laws; Runway and taxiway design and drainage management; Visual aids and air traffic control; Hangers, Helipads, service equipment. Planning of railway systems, relating to gauge, track, terminology and designs, controls, transits, tractive power ,rolling stock and track modernisation; Appurtenant works; Maintenance; Containerisation.
Harbours – shipping lanes, layouts, location identification , anchoring; sounding methods; Littoral transport with erosion and deposition; Components and operational Tidal data and analyses , Dry and Wet docks.
IES Mechanical Engineering Syllabus
IES Electrical Engineering Syllabus
IES Electronics and Telecommunication Engineering Syllabus
Mepco Schlenk Engineering College in Sivakasi, Tamil Nadu is a self financed technical institute, established in the year 1984 under the guidance of Mepco Schlenk Charities.
Mepco Schlenk Engineering College Sivakasi Courses Offered
Maharashtra Institute of Technology (MIT) is one of the leading self financed engineering colleges in Pune that was founded in the year 1983 by Dr.
Maharashtra Institute of Technology (MIT) Courses Offered
Motilal Nehru National Institute of Technology (MNIT) formerly known as Motilal Nehru Engineering College was founded in the year 1961 as a joint venture of the central government and the government of Uttar Pradesh.
Motilal Nehru National Institute of Technology (MNIT) Courses Offered
Mukesh Patel School of Technology Management and Engineering is an important part of Narsee Monjee Institute of Management Studies University, which is a deemed university.
Mukesh Patel School of Technology Management and Engineering Mumbai Courses Offered
NIT (National Institute of Technology) in Calicut is a public engineering institute that was set up in the year 1961.
NIT (National Institute of Technology) Calicut Courses Offered
National Institute of Technology is a public engineering college in West Bengal that was established in year 1960.
National Institute of Technology (NIT) Durgapur Courses Offered
National Institute of Technology Jamshedpur formerly known as Regional Engineering College is a public technical university located in Jamshedpur, Jharkhand.
National Institute of Technology Jamshedpur Courses Offered
NIT (National Institute of Technology) in Rourkela is a public engineering institute that was set up in the year 1964.
NIT (National Institute of Technology) Rourkela Courses Offered
National Institute of Technology Suratkal is a public engineering institute that was set up in the year 1960.
NIT (National Institute of Technology) Surathkal Courses Offered
National Institute of Technology in Tiruchirappalli is a public engineering institute that was set up in the year 1964.
NIT (National Institute of Technology) Trichy Courses Offered
PSG College of Technology is located in Coimbatore in Tamil Nadu.
PSG College of Technology Courses Offered
Punjab Technical University (PTU), Jalandhar was established in the year 1997 by the State Government of Punjab.
Punjab Technical University (PTU) Jalandhar Courses Offered
Rashtreeya Vidyalaya College of Engineering is a self financed technical institute, which was established by the Rashtriya Shikshana Sanstha Trust (RSST) in Bangalore.
Rashtreeya Vidyalaya College of Engineering Courses Offered
Satyabhama University, previously Satyabhama College of Engineering was founded in 1988 by Jeppiar Educational Trust.
Sathyabama University Chennai Courses Offered
School of Management Sciences (SMS), Varanasi is considered to be one of the top ten colleges in India for Business education.
School of Management Sciences (SMS) Courses Offered